In the last post, I discussed how the addition of 2 key tools can make a huge difference in the results you see when making rubbings with Paintstiks. Today, I have two more tips for making rubbings.

A little history…

When I began working with paintstiks, I always used the end of the paintstik for making rubbings. That’s what I read about, and that’s what I did. As a matter of fact, it never occurred to me to do anything else. It wasn’t until Nancy Kazlauckas and I were doing the photo shoot for the Leaves pattern that I even thought about what I was doing.

I asked Nancy to model for some pattern photos. When we got to one particular picture, she said, “I don’t make rubbings that way.” I just looked at her in surprise and asked her how she worked, thinking to myself “OK, I’ve been making rubbings for years — just what have I missed?” Nancy just looked at me, smiled, and said “I use the side of the paintstik, not the end.” As you can see from this photo, Nancy gets great rubbings using this method.

I felt like I was in one of those V8 commercials where someone smacked me upside the head. Not to mention that I felt a little silly that I had not thought of this myself! I grabbed a piece of scrap fabric, tried out Nancy’s technique and was simply amazed at the results. I think you will be too!

The “standard” instructions for making rubbings

I had been teaching people to use paintsiks for about 7 years when Nancy and I had our conversation. Doing what I had always done, I used a “standard” set of instructions.

• > Remove the film from the end of the paintstik
• > Place a textured object under your fabric
• > Hold the fabric down securely with one hand (or tape it down)
• > Apply paintstick color directly to the fabric, working in one direction, away from the hand holding the fabric  (don’t try to rub back and forth)
• > Continue adding color until you are happy with the results

A better method for making rubbings

To use Nancy’s amazing tip and the tools we learned about last week, we need to make a few changes to the process:

• > Remove the paintstik from the cardboard tube
• > Using a vegetable peeler (or a small paring knife), peel the film from the side of the paintstik rather than the end
• > Place a Grip-n-Grip mat on your work surface
• > Spray the top of your rubbing plate with 404 spray
• > Place the rubbing plate on the mat, sticky side up
• > Cover the rubbing plate with fabric
• > Apply paintstik color directly to the fabric, using the SIDE of the paintstik rather than the end
• > Continue adding color until you are happy with the results

And you WILL be happier with the results using this method! It really works! Let’s look at a few photos.

In the photo above, I removed the film from the end of the Blue paintstik. To prepare the red paintstik, I removed it from the cardboard tube and used a knife to peel the film from the side of the stick. (I generally peel the film about 1/3 to 1/2 of the stick, not all the way around.) Nancy likes to use the entire length of a full-size paintstik when she works, but I find it easier to work with something a little smaller.

If I am working with minis, I peel the film off the full length of the mini. If I have full size paintstiks, I cut the stick in half. I use one half for the rubbings and leave the other half intact for another project. Unless, of course, I need more paint…

Why use the side of the paintstik?

So, why do I think this is the best thing since sliced bread? It’s pretty clear once you give it a try, but I’ll do my best to explain. When you make rubbings with the end of the paintstik, you are working with a very small surface area. If your textured surface or rubbing plate has large open areas between the design elements, it’s easy for the paintstik to drop down into the “holes” in the design and for the rubbing to get rather messy.

If you use the side of the paintstik, you are working with a large, flat surface area. Your paint will stay out of the holes, and it’s much, much easier to get a nice, clean image — especially when you add a Grip-n-Grip mat and 404 spray to the recipe!

The right technique for the right job

Should you always use the side of your paintstik to make rubbings? Not necessarily. It’s a matter of using the right technique for the right job. If you are making rubbings from small, detailed textures, the end of the paintstik will be a much better tool. For example, this photo shows the first step in using Laura Murray’s StarBuilder shapes to make star parts.

(Click over to Laura Murray Designs to find out more about StarBuilders. And while you are there, be sure to check out the unmounted stamps. Laura does amazing things with paintstik colors that are as simple as paint, cut and fuse! Oops… I’m getting carried away… back to our lesson.)

But, if you are adding lots of rubbings to your fabric using our rubbing plates or large textured surfaces, using the side of your paintstik is much faster and gives beautiful, clean images. You’ll be making gorgeous yardage in no time at all!

The bottom line on better rubbings

The best 3 tips I can give you for making better rubbings (from this post and the last one) are

1. Use a Grip-n-Grip mat to keep your rubbing plates from sliding around as you work
2. Spray the top of the rubbing plate with 404 spray to keep your fabric from sliding around on the rubbing plate
3. Use the side of the paintstik rather than the end to get crisp, clear images

Grip-n-Grip mats are from Bear Thread Designs and you can find them in our Online Store. 404 spray is from JT Trading. Check with your local sewing center for 404 or a similar product.

Have fun with those rubbings!

Jun 6, 2011